I must be going on a major wood staining kick. Because I cannot seem to do anything else lately. Today is no different. I wanted to add some pictures to a wall. Even thought about them being done in a collage way. But, I have so many gallery wall collages. A picture ledge is the way I decided to go.
It allows me to layer them, add height difference, and it is still smaller then a full blown shelf. So it takes up less space. I just may become obsessed with picture ledges now. I created this within just about an hour. And that includes the time it took to have the wood stain dry.
For these picture ledges to work best, they work in at least pairs. So two is the minimum, Also if it can be placed on a wall where the length of the picture ledge can go from one side to the other is great as well. It makes the picture ledge have the biggest impact. I purchased four 3 ft. long boards that are 2 inches wide. And two 3ft long boards that are 1 inch wide. The two wider ones will be the back and bottom. And the smaller width one will be the front ledge. I chose a pine, with no finish. If there is a finish on your wood be sure to sand it up before the wood staining begins.
I stuck to my trusty and loved dark walnut stain. It is dark but allows the wonderful wood grain to show through. I put gloves on, dipped the soft cloth into the stain. Then wipe from left to right going with the wood grain. Be sure to move your hand quickly across. Otherwise there will be some spots where you can see where the cloth initially made contact with the board. Keep it moving and rub it in, you will be good to go. I did one coat. I really wanted to let the grain to show through.
So rich looking.
We are almost done, I told you this was a quick project. It took about 45 minutes for the stain to dry. It will feel sticky if it is not dry yet. To connect the three pieces of wood together. I set up the two larger ones into an L shape. Then using a drill to make a hole in the wood. I used three to connect them all together. Making the hole first was best to make the screw go in easier.
The screw can now go into the hole and not split the wood. The hard part of creating the hole has already been done. With the first two boards attached, then attach the same way with the smaller front ledge. You can either use wood glue or screws. I did not have any clamps to hold the ledge in place so wood glue was out for me. But the front screws really blend into the wood and are not seen at all.
I attached it to the wall by using two screws in the back into the wall. Really simple. If you plan to have heavy things displayed on the picture ledge putting in dry wall anchors or finding a stud to screw in will be needed. I added quite a bit to my picture ledge using no anchors or anything. It is holding up fine.
As you can see, it was a really simple L shape with a front ledge. When staining or painting the wood be sure to turn them over and paint both sides and the edges. They will be seen a lot more then a standard shelf.
When adding the pictures and accessories have fun with it. The wonderful thing about the picture ledge is you can do a little more then just a gallery wall of pictures. I added some shells, and letters that normally just sit on a table. Also layering the pictures is something that makes picture ledges stand out. I staggered things in front of each other, and mixed canvas and framed pictures.
I tried to add color, but not too busy. Each space needs a certain amount of busy. Some can handle more and some need less. You can and should add other keepsakes then just the pictures. That is what makes the picture ledge stand out. It becomes personal.
When building your picture ledge be sure to keep in mind the placement of it. Where they work best is on a wall that cannot hold a standard shelf or table, but needs a little something. A high traffic area is where most picture ledges find their home, but with it being high traffic areas be careful to not have it come out of the wall too much. You could have people hit it. The one I made being about 2 1/2 inches away from the wall and on a corner does not cause any issues with running into it. Just enough to make it noticeable and not dangerous.
Picture ledges are a great and modern way to dress up a space. You can dress them up minimally or add layer upon layer to it. It is a wonderful update to the standard picture gallery wall.
You’re reading DIY Picture Ledge, The Updates Gallery Wall , originally posted on Homedit. If you enjoyed this post, be sure to follow Homedit on Twitter, Facebook and Pinterest.
The post DIY Picture Ledge, The Updates Gallery Wall appeared first on Home Decorating Trends – Homedit.
via. Home Decorating Trends
