Summertime means time outdoors with friends and family. Brighten up your outdoor living with these colorful and fun do-it-yourself cube lanterns that will be great accessories for even the smallest of spaces.
Supplies (makes 2 small and one large cube):
- 15 18″ square dowel rods available at your local craft store
- pen
- tape measure
- saw (handsaw, miter saw or table saw)
- spray paint
- 3 large washers (for the center candle)
- 3 candles
- superglue (and accelerator such as kicker to speed up drying if desired)
1. Start by measuring out the dowel rods that will be used to create the cubes in whatever size you desire. Here we created two 4″ cubes and one 6.5″ cube. For each cube you will need 13 of the same sized pieces no matter what size you create. It is easiest to cut them all at the same time if possible so that the measurements are as close as possible.
2. Layout all your pieces before starting to glue. Create one box for the top with 4 pieces, another box for the bottom with 4 more pieces and one extra to go across the center. Set 4 more aside to create the height of the box.
3. Glue all the pieces together. Start with the top and bottom pieces. Gently dap a small drop of super glue to the ends of the dowel rods and hold together for approximately 15-30 seconds while drying. This is where the kicker accelerator will come in handy if you have it to speed up the drying process. You can also dap a small amount of glue over the corner seams of each connection to ensure that the dowels stay well glued together. Create the top and bottom first and let dry. Once dry connect together in the cube shape with your 4 remaining dowels by attaching the cubes at the corners. Once finished with the cube, glue the washer to the bottom of the cross section dowel. This will be the most time consuming part of the project but go slow and allow each of the attachments plenty of time to dry so that the project doesn’t fall apart later.
5. Lastly, once the cubes are all attached and completely dry, spray paint each of them a fun bright color! Make sure to flip over and get the underside of the cube.
Once the cubes are dry, place the votive candle in the center (make sure to use a candle already in glass or some sort of container) and enjoy your new accessory. Please note these are made with wood so don’t leave the lit candles unattended and ensure that there is plenty of room between your flame and the sides of the cube.
You’re reading DIY Outdoor Cube Lanterns , originally posted on Homedit. If you enjoyed this post, be sure to follow Homedit on Twitter, Facebook and Pinterest.
The post DIY Outdoor Cube Lanterns appeared first on Home Decorating Trends – Homedit.
via. Home Decorating Trends
